Checking the front and rear
brake pads
The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
Front brake pads
ZAUM0959
1. Brake pad wear indicator groove
Each front brake pad is provided with a
wear indicator groove, which allows
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator groove. If a brake
pad has worn to the point that the wear
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU22392
indicator groove has almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.
Rear brake pads
EAU22420
ZAUM0278
1
1. Lining thickness
Check each rear brake pad for damage
and measure the lining thickness. If a
brake pad is damaged or if the lining
thickness is less than 1 mm (0.04 in),
have a Yamaha dealer replace the
brake pads as a set.
Checking the brake fluid level
Before riding, check that the brake fluid
is above the minimum level mark.
Check the brake fluid level with the top
EAU22500
of the reservoir level. Replenish the
brake fluid if necessary.
1
ZAUM0280
1. Minimum level mark
Improper maintenance can result in
loss of braking ability. Observe
these precautions:
6-15
1
1
Specified brake fluid:
DOT 4
WARNING
EAU22581
6
EWA15990