Indicator Lights And Warning Light - Yamaha AEROX NS50 Owner's Manual

Hide thumbs Also See for AEROX NS50:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
To unlock the steering
3
1. Push.
2. Turn.
Push the key in, and then turn it to "
while still pushing it.
Indicator lights and warning
light
NS50
1
2
ZAUM0908
"
NS50N
2
1
ZAUM0957
1. Coolant temperature warning light "
2. High beam indicator light "
3. Turn signal indicator light "
4. Fuel level warning light "
5. Oil level warning light "
3-2
EAU11006
Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
3
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
4
5
Oil level warning light "
This warning light comes on if the oil
level in the 2-stroke engine oil tank is
low during operation. If the warning
light comes on during operation, stop
3
immediately and fill the oil tank with Ya-
malube 2 or equivalent 2-stroke engine
4
oil of either JASO grade "FC" or ISO
grades "EG-C" or "EG-D". The warning
light should go off after the 2-stroke en-
5
gine oil tank has been refilled.
The electrical circuit of the warning light
can be checked by turning the key
"
to "
". The warning light should come
"
on for a few seconds, and then go off.
"
"
"
EAU11020
"
EAU11080
"
EAUM2771
"

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aerox ns50nAerox r ns50Aerox r ns50n

Table of Contents