Yamaha AEROX NS50 Owner's Manual page 21

4. When the minutes digits start
flashing, push the "RESET/SE-
LECT" button to set the minutes.
ZAUM0913
5. Push the "RESET/SELECT" but-
ton for at least three seconds to
start the clock.
TIP
After setting the clock, be sure to push
the "RESET/SELECT" button for at
least three seconds before turning the
key to " ", otherwise the clock will not
be set.
Odometer and tripmeter modes
Pushing the "RESET/SELECT" button
switches the display between the
odometer mode "ODO" and the tripme-
ter "TRIP" in the following order:
INSTRUMENT AND CONTROL FUNCTIONS
ODO → TRIP → ODO
RESET/
SELECT
RESET/
SELECT
ZAUM0914
If the fuel level warning indicator comes
on (see page 3-2), the odometer dis-
play will automatically change to the
fuel reserve tripmeter mode "TRIP F"
and start counting the distance traveled
from that point. In that case, pushing
the "RESET/SELECT" button switches
the display between the various tripme-
ter and odometer modes in the follow-
ing order:
TRIP F → ODO → TRIP → TRIP F
3-5
RESET/
RESET/
SELECT SELECT
RESET/
SELECT
ZAUM0915
To reset a tripmeter, select it by push-
ing the "RESET/SELECT" button, and
then push it again for at least three sec-
onds. If you do not reset the fuel re-
serve tripmeter manually, it will reset
itself automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
TIP
The display cannot be changed back to
"TRIP F" after pushing the "RESET/SE-
LECT" button.
Fuel gauge
The fuel gauge indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel gauge disappear to-
wards "E" (Empty) as the fuel level
3