Catalytic Converter; 2-Stroke Engine Oil - Yamaha AEROX NS50 Owner's Manual

Hide thumbs Also See for AEROX NS50:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS

Catalytic converter

This model is equipped with a catalytic
converter in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. To prevent a fire hazard or
3
burns:
Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
Make sure that the exhaust sys-
tem has cooled down before do-
ing any maintenance work.
Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU13433
NOTICE
Use only unleaded gasoline. The use
of leaded gasoline will cause unre-
EWA10862
pairable damage to the catalytic
converter.
ECA10701

2-stroke engine oil

Make sure that there is sufficient oil in
the 2-stroke engine oil tank. Add the
recommended 2-stroke engine oil if
necessary.
ZAUM0204
TIP
Make sure that the 2-stroke engine oil
tank cap is properly installed.
3-10
Recommended oil:
2-stroke engine oil (JASO grade
"FC", or ISO grades "EG-C" or "EG-
D")
Oil quantity:
1.40 L (1.48 US qt, 1.23 Imp.qt)
EAUM1151

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aerox ns50nAerox r ns50Aerox r ns50n

Table of Contents