Multi-Function Display (Ns50) - Yamaha AEROX NS50 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Multi-function display (NS50)

4
1
2
3
3
ZAUM0911
1. Speedometer
2. Clock
3. "RESET/SELECT" button
4. Odometer/tripmeters/fuel reserve tripmeter
5. Fuel gauge
TIP
The multi-function display performs the
following self-test for three seconds in
order to check the electrical circuit.
● The speedometer digits display
from 0 to 80, and then from 80 to 0
in kilometers. If the speedometer is
set to miles, the digits will display
from 0 to 50, and then from 50 to 0.
● All LCD segments and warning
lights come on and then go off.
EAUM2821
WARNING
Be sure to stop the vehicle before
5
making any setting changes to the
multi-function
settings while riding can distract the
operator and increase the risk of an
accident.
The multi-function display is equipped
with the following:
● a digital clock
● a
shows riding speed)
●
an odometer (which shows the to-
tal distance traveled)
●
a tripmeter (which shows the dis-
tance traveled since it was last set
to zero)
● a fuel reserve tripmeter (which
shows the distance traveled on the
fuel reserve)
●
a fuel gauge
●
a self-diagnosis device
TIP
● Be sure to turn the key to "
fore using the "RESET/SELECT"
button.
EWA12312
display. Changing
digital speedometer (which
" be-
3-4
●
For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilometers
and miles, when the main switch is
turned to " ", press the "RE-
SET/SELECT" button for at least
eight seconds.
To set the clock:
1. Select the odometer and push the
"RESET/SELECT" button for at
least three seconds.
2. When the hour digits start flashing,
push the "RESET/SELECT" button
to set the hours.
ZAUM0912
3. To change the minutes digits, push
the "RESET/SELECT" button for
at least three seconds.