Indicators, Indicator Lights And Warning Light - Yamaha XMAX 250 YP250R Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
PUSH
3
NOTE:
Be sure to use the standard key
(black bow) for regular use of the
vehicle. To minimize the risk of losing
the code re-registering key (red bow),
keep it in a safe place and only use it
for code re-registering.
ON
All electrical circuits are supplied with
power, the meter lighting, taillight,
license plate light and auxiliary lights
come on, and the engine can be star-
ted. The key cannot be removed.
NOTE:
The headlights come on automatically
when the engine is started and stay
on until the key is turned to "OFF",
even if the engine stalls.
OFF
All electrical systems are off. The key
can be removed.
LOCK
The steering is locked, and all electri-
cal systems are off. The key can be
removed.
To lock the steering
1. Turn the handlebars all the way to
the left.
2. Push the key in from the "OFF"
position, and then turn it to
"LOCK" while still pushing it.
EAU10550
3. Remove the key.
To unlock the steering
Push the key in, and then turn it to
"OFF" while still pushing it.
s WARNING
s
Never turn the key to "OFF" or
"LOCK" while
moving, otherwise the electrical
systems will be switched off, which
may result in loss of control or an
accident. Make sure that the vehi-
cle is stopped before turning the
key to "OFF" or "LOCK".
EAU10660
Indicators, indicator lights
and warning light
EAU10680
Turn signal indicator lights "
"
d
The corresponding indicator light flas-
hes when the turn signal switch is
pushed to the left or right.
High beam indicator light "
This indicator light comes on when
the high beam of the headlight is swit-
ched on.
Fuel level warning light "
This warning light comes on when the
fuel level drops below approximately
EWA10060
2.0L (0.44USgal)(1.76Imp.gal). When
this occurs, refuel as soon as possi-
ble.
the vehicle is
The electrical circuit of the warning
light can be checked by turning the
key to "ON".
3-2
"
z
EAU33461
EAU11030
" and
c
EAU11080
"
j
EAU11350
"