PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the tail/brake light
bulb or a rear turn signal
light bulb
6
1. Tail/brake light lens
Tail/brake light bulb
1. Remove the tail/brake light lens
by removing the screws.
EAUT1923
1
1. Screw
2. Tail/brake light lens
2. Remove the burnt out bulb by
pushing it in and turning it coun-
terclockwise.
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
1
4. Install the lens by installing the
2
Rear turn signal light bulb
1. Remove the tail/brake light lens
1. Screw
1
2. Turn signal light lens
2. Remove the turn signal light lens
6-23
push it in, and then turn it clock-
wise until it stops.
screws.
by removing the screws.
by removing the screw.
1
2