Multi-function display
50
40
60
30
km/h
70
20
80
10
0
1
1. Select button
2. Odometer/tripmeter
3. Clock
4. Fuel meter
s WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display. Changing
settings while riding can distract
the operator and increase the risk
of an accident.
The multi-function display is equip-
ped with the following:
●
a digital clock
●
an odometer (which shows the
total distance traveled)
INSTRUMENT AND CONTROL FUNCTIONS
●
EAUS1424
a tripmeter (which shows the dis-
tance traveled since it was last
set to zero)
●
a fuel gauge
2
●
a self-diagnosis device
3
●
a function button (which selects,
sets and resets various modes of
the multi-function display)
TIP
●
Be sure to turn the key to "
4
before using the button.
●
For the U.K. only: The odometer
and tripmeter are displayed in
miles.
EWA12312
To set the clock:
1. Select the odometer and push
the button for at least two
seconds.
2. When the hour digits start flas-
hing, push the button to set the
hours.
"
3. To change the ten-minute digit,
4. When the ten-minute digit starts
5. To change the one-minute digit,
3-4
push the button for at least two
seconds.
flashing, push the button to set it.
push the button for at least two
seconds.
3