Removing And Installing The Cowling And Panel - Yamaha JOGR JOGRR CS50 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Removing and installing the
cowling and panel
1
1. Cowling A
6
1
1. Panel A
The cowling and panel shown above
need to be removed to perform some
of the maintenance jobs described in
EAU18740 this chapter. Refer to this section
each time a cowling or panel needs to
be removed and installed.
Cowling A
To remove the cowling
1. Remove the screws, and then
pull the cowling off as shown.
1
1. Cowling
2. Screw
2. Disconnect the headlight lead
EAUS1520
2
1. Headlight lead connector
2. Auxiliary light coupler
3. Turn signal coupler
To install the cowling
1. Connect the headlight leads con-
2. Place the cowling in the original
6-5
connectors, the turn signal cou-
plers, and the auxiliary light cou-
plers.
3
2
1
B B Y Y G G
nectors, the turn signal couplers,
and the auxiliary light couplers.
position, and then install the
screws.