Replacing A Front Turn Signal Light Bulb; Replacing Tail/Brake Light Bulb Or Rear Turn Signal Light Bulb - Yamaha VERSITY VP300 Owner's Manual

Replacing a front turn signal
light bulb
1. Place the scooter on the
centerstand.
2. Remove cowling A. (See page
6-7 for cowling removal and ins-
tallation procedures.)
PERIODIC MAINTENANCE AND MINOR REPAIR
EAUT0022*
ZAUM0465
1. Turn signal socket (x2)
3. Remove the socket (together with
the bulb)
counterclockwise.
4. Remove the defective bulb by
pushing it in and turning it
counterclockwise.
5. Insert a new bulb into the socket,
push it in, and then turn it
clockwise until it stops.
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the cowling.
Replacing the tail/brake light
bulb or a rear turn signal
light bulb
1
by turning it
6-34
1. Place the scooter on the
centerstand.
2. Remove panel E. (See page
6-11 for panel removal and ins-
tallation procedures.)
EAUT0021*
6