Adjusting The Shock Absorber Assembly - Yamaha JOGR JOGRR CS50 Owner's Manual

NOTICE
Keep the following points in mind
when using the storage compart-
ment.
● Since the storage compart-
ment accumulates heat when
exposed to the sun, do not sto-
re anything susceptible to heat
inside it.
●
To avoid humidity from sprea-
ding through the storage com-
partment, wrap wet articles in
a plastic bag before storing
them in the compartment.
●
Since the storage compart-
ment may get wet while the
scooter is being washed, wrap
any articles stored in the com-
partment in a plastic bag.
● Do not keep anything valuable
or breakable in the storage
compartment.
INSTRUMENT AND CONTROL FUNCTIONS
ECA10080 To store a helmet in the storage com-
partment, place the helmet upside-
down with the front facing forward.
TIP
● Some helmets cannot be stored
in the storage compartment
because of their size or shape.
●
Do not leave your scooter unat-
tended with the seat open.
Adjusting the shock
absorber assembly
(Depends on models)
1. Spring preload adjusting ring
2. Position indicator
This shock absorber assembly is
equipped with a spring preload adjus-
ting ring.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
3-12
EAU14832
3
ECA10101