Anti-Theft Device Housing; Adjusting The Shock Absorber Assemblies - Yamaha Versity VP300 Owner's Manual

CAUTION:
Keep the following points in mind
when using the storage compartment.
•
Since the storage compartment
accumulates heat
exposed to the sun, do not
store anything susceptible to
heat inside it.
•
To avoid humidity
spreading through the storage
compartment, wrap wet articles
in a plastic bag before storing
them in the compartment.
•
Since the storage compartment
may get wet while the scooter
is being washed, wrap any arti-
cles stored in the compartment
in a plastic bag.
•
Do not keep anything valuable
or breakable in the storage
compartment.
To store a helmet in the storage
compartment, place the helmet with the
front facing backward.
INSTRUMENT AND CONTROL FUNCTIONS
EC000010
NOTE :
•
Some helmets cannot be stored
in the storage compartment
because of their size or shape.
•
Do not leave your scooter
when
unattended with the seat open.

Anti-theft device housing

from
The anti-theft device housing, located
in the storage compartment under the
seat, is designed to hold a genuine
Yamaha U-LOCK. (See page 3-12 for
seat opening and closing procedures.)
When placing a U-LOCK in the storage
compartment, securely fasten it with the
straps. When the U-LOCK is not in the
storage compartment, be sure to
secure the straps to prevent losing
them.
NOTE :
Some U-LOCKS cannot fit into the
housing due to their size or shape.
b
EAUM1940
ZAUM0414
1. Spring preload adjusting ring
2. Position indicator
Adjusting the shock absor-
ber assemblies
Each shock absorber assembly is
equipped with a spring preload
adjusting ring.
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
3-14
1
2
3
4
2
a
1
EAU00300
EC000015
3