Front Brake Lever; Rear Brake Lever - Yamaha Versity VP300 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Hazard switch " ", "
With the key in the "
switch to " " to turn on the hazard
lighting (simultaneous flashing of all turn
signal lights). To turn off the hazard
lighting, set this switch to " " and, then
turn the key to " ".
3
NOTE :
Even if the key is turned from "
" " with the hazard lighting on, the
hazard lighting will continue to flash
regardless of the hazard switch position.
To cancel the hazard lighting, the key
must be turned to "
switch must be set to the " " position.
The hazard lighting is used in case of
an emergency or to warn other drivers
when your scooter is stopped where it
might be a traffic hazard.
CAUTION:
Do not use the hazard light for an
extended length of time, otherwise
the battery may discharge.
EAUM0111
"
" position, set this
ZAUM0084

1. Front brake lever

" to
Front brake lever
The front brake lever is located on the
right handlebar grip. To apply the front
" and the hazard
brake, pull this lever toward the
handlebar grip.
EC000006
1
ZAUM0085

1. Rear brake lever

EAU03882
Rear brake lever
The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the
handlebar grip.
3-9
1
EAU00163