Replacing A Headlight Bulb - Yamaha Versity VP300 Owner's Manual

Replacing the headlight bulb
This scooter is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
1. Remove cowling A together with
the headlight unit. (See page 6-7
for cowling removal and installa-
tion procedures.)
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU04285
ZAUM0461
1. Bulb cover
2. Headlight coupler
2. Disconnect the headlight coupler,
and then remove the bulb cover.
1
2
ZAUM0462
1. Headlight bulb holder
Headlight bulbs get very hot.
Therefore, keep flammable products
away from a lit headlight bulb, and
do not touch the bulb until it has
cooled down.
6-32
3. Remove the headlight bulb holder
by pushing it inward and turning
it counterclockwise, and then
remove the defective bulb.
WARNING
1
6
EW000119