Starting Off - Yamaha Versity VP300 Owner's Manual

Hide thumbs Also See for Versity VP300:
Table of Contents

Advertisement

NOTE :
If the engine does not start, release the
start switch, wait a few seconds, and
then try again. Each starting attempt
should be as short as possible to
preserve the battery. Do not crank the
engine more than 10 seconds on any
one attempt. If the engine does not
start, try with the throttle open 1/8 turn.
CAUTION:
For maximum engine life, never
accelerate hard when the engine is
cold!
OPERATION AND IMPORTANT RIDING POINTS
ZAUM0419
1. Grab bar
ECA00045

Starting off

NOTE :
Before starting off, allow the engine to
warm up.
1. While pulling the rear brake lever
with your left hand and holding the
grab bar with your right hand,
push the scooter off the
centerstand.
2. Sit astride the seat, and then
adjust the rear view mirrors.
3. Switch the turn signal on.
4. Check for oncoming traffic, and
1
5. Switch the turn signal off.
EAU00433
5-2
then slowly turn the throttle grip
(on the right) in order to take off.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versity 300

Table of Contents