Yamaha Versity VP300 Owner's Manual page 62

PERIODIC MAINTENANCE AND MINOR REPAIR
1
ZAUM0129
1. Engine oil drain bolt
2. Washer
4. Check the washer for damage and
replace it if necessary.
5. Install the washer and the engine
6
oil drain bolt, and then tighten the
drain bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
20 Nm (2.0 m
NOTE :
Make sure that the washer is properly
seated.
6. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil filler
cap.
Recommended engine oil:
2
See page 8-1.
Oil quantity:
Periodic oil change:
Total amount (dry engine):
CAUTION:
•
Do not use oils with a diesel
specification of "CD" or oils of a
higher quality than specified. In
addition, do not use oils labeled
"ENERGY CONSERVING II" or
kgf)
higher.
•
•
Be sure no foreign material
enters the crankcase.
1.2 L
1.4 L
ECA00140
6-15
7. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
8. Reset the oil change indicator.
(See page 3-7 for details.)