Anti-Theft Alarm (Optional) - Yamaha Versity VP300 Owner's Manual

Hide thumbs Also See for Versity VP300:

Owner's manual (104 pages)

100

101

102

103

104

Table of Contents

INSTRUMENT AND CONTROL FUNCTIONS

ZAUM0582

1. Oil change indicator

Oil change indicator "OIL"

The engine oil should be changed when

this indicator comes on. The indicator

stays on until it is reset. After changing

the engine oil, reset the indicator as

follows.

1. While holding the "MODE" and

"SET" buttons pushed, turn the

key to "

2. Continue holding the "MODE" and

"SET" buttons pushed for two to

five seconds.

3. Release the buttons and the oil

change indicator will go off.

NOTE :

•

The oil change indicator will come

on at the initial 1000 km (600 mi)

and every 3000 km (4800 mi)

thereafter.

•

If the engine oil is changed before

the oil change indicator comes on

(i.e. before the periodic oil change

interval has been reached), the

indicator must be reset after the

oil change for the next periodic oil

change to be indicated at the cor-

rect time. After resetting, the

indicator will come on for two se-

conds. If the indicator does not

come on, repeat the procedure.

3-7

10O

12O

14O

16O

km/h

ZAUM0406

1. Alarm indicator light