Instrument And Control Functions; Main Switch/Steering Lock - Yamaha Versity VP300 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

PUSH
3
ZAUM0253

Main switch/steering lock

The main switch/steering lock controls
the ignition and lighting systems, and
is used to lock the steering. The various
positions are described below.
ON " "
All electrical circuits are supplied with
power; the meter lighting, taillight,
license plate light and auxiliary light
come on, and the engine can be
started. The key cannot be removed.
NOTE :
The headlight comes on automatically
when the engine is started and stays
on until the key is turned to "
sidestand is moved down.
OFF " "
All electrical systems are off. The key
EAU00029
can be removed.
LOCK " "
The steering is locked, and all electrical
systems are off. The key can be
removed.
EAU04580
To lock the steering
1. Turn the handlebars all the way
to the left.
2. Push the key in from the "
position, and then turn it to " "
(lock) while still pushing it.
3. Remove the key.
To unlock the steering
Push the key in, and then turn it to
(off) while still pushing it.
" or the
Never turn the key to "
while the scooter is moving,
EAU00038
otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident. Make
sure that the scooter is stopped
EAU00040
before turning the key to "
" ".
" (off)
3-1
WARNING
" or " "
EW000016
" or