ZAUM0558
1. Open.
To close the seat
1. Fold the seat down, and then push
it down to lock it in place.
2. Remove the key from the main
switch if the scooter will be left un-
attended.
TIP
Make sure that the seat is properly se-
cured before riding.
INSTRUMENT AND CONTROL FUNCTIONS
Anti-theft device housing
1
ZAUM0561
1. Anti-theft device housing
The anti-theft device housing, located
under the seat, is designed to store a
joint type anti-theft device with a maxi-
mum length of 1 meter. (See page 3-9
for seat opening and closing proce-
dures.)
TIP
Some anti-theft devices cannot fit into
the housing due to their size or shape.
EAUM1580
Adjusting the shock absorber
assembly (CW50L model only)
1
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring in direction (a). To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring in direction (b).
3-10
EAU14833
ECA10101
3