Volvo S80 Owner's Manual page 140

Autostoring..
Once disappears from the dis-
play, the stations are stored. The radio contin-
Auto
ues in Auto mode and appears on the
display. The automatically stored presets can
now be selected using the preset buttons.
Automatic preset storage can be cancelled
using EXIT.
Auto mode is cancelled by pressing for exam-
ple AUTO or FM.
Returning to Auto mode provides access to the
autostored presets:
1. Press AUTO.
> Auto appears on the display.
2. Press a preset button.
Scan wavelength
The function automatically searches the cur-
rent wavelength for strong stations. When a
station is found, it is played for approx. 8 sec-
onds before scanning is resumed.
1. Select wavelength using AM or FM.
2. Press SCAN.
SCAN appears on the display. Close using
SCAN or EXIT.
RDS functions
RDS (Radio Data System) links FM transmitters
into a network. An FM transmitter in such a
network sends information that gives an RDS
radio the following functions:
•
Automatically switches to a stronger trans-
mitter if reception in the area is poor.
•
Searches for programme type, such as
traffic information or news.
•
Receives text information on current radio
programme.
NOTE
Some radio stations do not use RDS or only
some if its functionality.
If a required programme type is located the
radio can switch stations interrupting the audio
source currently in use. For example, if the CD
player is in use, it is paused. The interrupting
transmission is played at a preset volume, see
page 141. The radio returns to the previous
audio source and volume when the set pro-
gramme type is no longer broadcast.
The programme functions alarm (ALARM), traf-
fic information (TP), news (NEWS), and pro-
gramme types(PTY) interrupt one another in
order of priority, where alarm has the highest
priority and programme types has the lowest.
For further programme interruption settings
(EON and REG), see page 140. Press EXIT to
return to the interrupted audio source.
04 Comfort and driving pleasure
Alarm
This function is used to warn of serious acci-
dents and catastrophes. The alarm cannot be
temporarily interrupted or deactivated. The
message ALARM!
when an alarm message is transmitted.
Traffic information – TP
This function allows traffic information sent
within a set station's RDS network to break
through. The TP
function is activated. If the set station can send
traffic information then
display.
Activate/deactivate under
TP.
TP from current station/all stations
The radio can interrupt with traffic information
from only the set (current) station or from all
stations.
Go to FM settings
settings
News
This function allows news broadcasts sent
within a set station's RDS network to break
through. The NEWS
function is active.
Audio system
appears on the display
symbol indicates that the
appears on the
FM settings
Advanced radio
TP TP Station to change.
symbol indicates that the
04
139