Parts Identification; Spare Parts - Clarke Jumpstart 910 Operating & Maintenance Manual

PARTS IDENTIFICATION

1 Positive Battery Connection Lead
Lamp
2 to provide light for roadside repairs or emergency situations
3 230/12V Transformer for charging internal battery pack
Cigarette Lighter Adaptor
4
5 Volt Meter to indicate the state of charge of the internal battery
6 Lamp ON/OFF Switch
7 Cigar Lighter Socket
8 Voltage Test Switch
9 12 DC Socket
connects the 230 Volt charger to allow mains charging
10 Negative Battery Connection Lead
11 Air Compressor ON/OFF switch
12 Air Pressure Gauge
13 Adapters
14 Air Hose

SPARE PARTS

No. Description
1 Positive Battery Connection Lead
2 Lamp Bezel c/w lens
3 230V Battery Charger
4 Cigarette Lighter Adapter
10 Negative Battery Connection Lead
- Battery 12V 17AH
- Air Compressor c/w Air Gauge
13 Adapters (Set of three)
14 Air Hose w/connector and worm drive Clip
Fig. 1
to connect to the positive battery terminal
for charging internal battery pack
switches the lamp ON or OFF
for use with the cigar lighter adapter provided (Item 4)
press to indicate the internal batteries power level
to connect to the negative battery terminal
(Ref. Fig.1)
- 4 -
Part No.
HT90001
HT90003
HT90006
HT90007
HT90002
HT90005
HT91001
HT91002
HT91003