Turning On The System - Epson Ensemble HD User Manual

Turning On the System

When you're ready to watch a movie, you can lower the screen, turn on the projector, and turn on the
AV controller (with its built-in DVD player) with the touch of a button.
1 Make sure the MAIN menu is displayed on the remote control. If necessary, press the
2
Point the remote control at the screen and press the
down and the projector and AV controller turn on.
Note
Make sure the remote control remains pointed at the screen until the system has turned on. (You see the
on the remote control screen while it's turning on the system.) If the system does not turn on, see "Basic Operation
Problems" on page 61.
The projector lamp takes up to 30 seconds to achieve full brightness.
3 When you're done using the system, make sure the MAIN menu is displayed on the remote control and
press the button. The projector and AV controller turn off, and the screen raises up automatically.
OFF
Note
If you install additional components, such as a cable box or satellite receiver, you can set up the remote control to turn
them on with one button, too. See "Setting Up Macros" on page 77.
MAIN
button
MAIN
DVD
CABLE
SAT
HD
RADIO
1 OF 2
ON
button to turn on the system. The screen comes
ON
13
button.
MAIN
button
icon flash