Listening To A Tape Deck; Listening To Am/Fm Radio; Tuning To The Desired Station - Epson Ensemble HD User Manual

Listening to a Tape Deck

Make sure your tape deck (or other audio source) is connected to the
AV controller, as described in "Connecting Audio Equipment" on page 36.
1
Select the option on the remote control, then select
AUDIO
tape deck.
2 Use the controls on your tape deck to begin playing music.

Listening to AM/FM Radio

You can use the AV controller to receive AM or FM radio broadcasts. First make sure an antenna is connected,
as described in the Installation Guide.

Tuning to the Desired Station

1 Select the option on the remote control to activate the radio:
RADIO
Note
To use the radio, it is not necessary to lower the screen or turn on the projector.
2 Select the option on the remote control to switch between AM and FM. The display on the
BAND
AV controller shows the current station:
3
Select or
TUNE+ TUNE–
• Press the button momentarily and then release it to change the frequency manually.
• Or press and hold the button to find the next available station automatically. The tuner searches until
a station of sufficient strength has been found, and the word "TUNED" appears on the display. Weak
stations are skipped during the auto-tuning process.
MAIN
CABLE
RADIO
1 OF 2
Band
to change the frequency:
AUDIO 1
. This switches the audio input to your
AUD1
DVD
SAT
HD
Select
Frequency
29
port on the back of the
RADIO