Setting Up Macros - Epson Ensemble HD User Manual

Use the numeric keypad to enter characters in the same way as you send text-messages with many cell
phones. Each time you press a button, it selects a different character represented by that button, as shown
below:
6 When you have finished editing the line of text, press the button to its right. You see SAVED displayed at
the bottom of the screen.
7
To edit any other commands for the same device, select the command and repeat steps 5 and 6.
8 When you've finished making edits, press the

Setting Up Macros

A macro lets you perform several operations in sequence automatically. For example, when you press the
button to turn on the Ensemble HD system, the remote control turns on the projector, turns on the
AV controller, and lowers the screen—all with one press of a button.
If you find there are other operations you sometimes perform together—for example, turning on your cable
box and DVR—you can create a macro to perform the operations automatically. You store the macro by saving
it as a menu option for a particular device (for example, you could create a macro called SYS ON in the DVR
menu).
Note
You cannot use any of the physical buttons on the remote control to store a macro.
1 Choose a name for the new macro and add it to the desired menu (see "Editing Device Names and
Commands" on page 75).
2
Press and hold both the
displays SETUP.
Note
You have 30 seconds to complete each step. After that, the remote control returns to normal operation.
3
Select the
MACRO
4 Navigate through the menu pages to the newly created menu item you want to turn into a macro, and
press the button to its right.
The bottom of the screen flashes
ABC1
JKL4
MNO5
STU7
VWX8
and buttons for approximately three seconds. The top of the screen
MAIN ENT
option.
.
Step 0
DEF2
GHI3
PQR6
YZ9
Symbols
button several times to return to normal operation.
MAIN
77
ON