Passcode - Polycom SoundStation 2W User Manual/Administrator Manual

Passcode

When you select Passcode from the Admin Setup menu,
the screen will display whether or not a passcode is cur-
rently assigned.
Assign a passcode:
1. Press the Menu button, choose
Admin Setup using the Scrolling
buttons, and press the Select but-
ton. Choose Passcode using the
Scrolling buttons, and press the
Select button.
2. Press the
ASSIGN
a three-digit password. If you
make an error, press the
key to erase the error.
3. Press the
SAVE
press the
CANCEL
Exit button if you choose not to
save the passcode.
►Record the passcode. If the passcode is forgotten,
contact Polycom Support at www.polycom.com/support
and click on "How to Contact Support and Service" for
your local support contact information.
Remove a passcode:
Removing the passcode removes the requirement for an
access passcode for the Admin Setup menu.
1. From the Admin Setup menu,
choose Passcode using the Scroll-
ing buttons and press the Select
button.
2. Press the
REMOVE
the current passcode, and press the
soft key. If you decide not
ENTER
to remove the password, press the
soft key or the Exit button.
CANCEL
►If you enter an incorrect pass-
word, you will be notified to try
again.
►If you make an error, press the
soft key to erase the error.
<DEL
soft key and enter
soft
<DEL
soft key. You may
soft key or the
soft key, enter
SoundStation2W™ Administrator Guide - 30