3.2.4 Checking the WAN Configuration
You can check your WAN configuration using debugging commands. This section
shows you to do this in a Windows platform.
Click Start > Run. Type CMD and hit [ENTER].
1
In the prompt, type Telnet.
2
Connect to the ZyXEL Device by typing open 192.168.1.1 (the default IP address
3
of the ZyXEL Device).
Enter the administrator user name and password ("admin/admin") when asked.
4
Type show interfaces. You should see the WAN interfaces you have just
configured in the previous sections.
This concludes the WAN screens configuration tutorial. You have set up the WAN
interfaces for the services needed by the Marketing division of the company.
FSG2200HNU User's Guide
Chapter 3 Tutorial
45