Table of Contents
Advertisement
Chapter 7 Wireless LAN
Table 29 Network > Wireless LAN > Security: WPA/WPA2
LABEL
Encryption Type
Radius
Server IP
Address
Server Port
Share Secret
Apply
Reset
7.4 The QoS Screen
This screen allows you to enable or disable wireless quality of service.
116
DESCRIPTION
Select TKIP to enable Temporal Key Integrity Protocol (TKIP) security
on your wireless network. Use this for WPA-PSK security mode and if
the other access points on your network support do not have an AES
option. If you select this, IEEE802.11n compliant WLAN devices cannot
associate with the ZyXEL Device.
Select AES to enable Advanced Encryption System (AES) security on
your wireless network. AES provides superior security to TKIP. Use
AES for WPA2-PSK security mode or if the other access points on your
network support it. Also select this if you have IEEE802.11n compliant
WLAN devices that associate with the ZyXEL Device.
Select TKIPAES MIX to allow both TKIP and AES types of security in
your wireless network. Use this WPA2-PSK security mode that you
want to make WPA compatible.
Enter the IP address of the external authentication server in dotted
decimal notation.
Enter the port number of the external authentication server. The
default port number is 1812.
You need not change this value unless your network administrator
instructs you to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyXEL
Device.
The key must be the same on the external authentication server and
your ZyXEL Device. The key is not sent over the network.
Click this to save your changes back to the ZyXEL Device.
Click this to reload the previous configuration for this screen.
FSG2200HNU User's Guide
Advertisement
Table of Contents
