Table of Contents
Advertisement
19.3 The Time Setting Screen
To change your ZyXEL Device's time and date, click Maintenance > System >
Time Setting. The screen appears as shown. Use this screen to configure the
ZyXEL Device's time based on your local time zone.
Figure 87 Maintenance > System > Time Setting
The following table describes the fields in this screen.
Table 66 Maintenance > System > Time Setting
LABEL
Current Time and Date
Current Time
Current Date
Time and Date Setup
Get from Time
Server
Time
Protocol
Time Server
Address
Time Zone Setup
Time Zone
FSG2200HNU User's Guide
DESCRIPTION
This field displays the time of your ZyXEL Device.
Each time you reload this page, the ZyXEL Device synchronizes the
time with the time server.
This field displays the date of your ZyXEL Device.
Each time you reload this page, the ZyXEL Device synchronizes the
date with the time server.
This shows the time service protocol that your time server sends when
you turn on the ZyXEL Device.
Enter the IP address or URL (up to 20 extended ASCII characters in
length) of your time server. Check with your ISP/network administrator
if you are unsure of this information.
Choose the time zone of your location. This will set the time difference
between your time zone and Greenwich Mean Time (GMT).
Chapter 19 System
209
Advertisement
Table of Contents
