Table of Contents
Advertisement
Note: Refer to
Figure 25 Network > WAN: Egress Queue Information > Edit
The following table describes the labels in this screen.
Table 18 Network > WAN: Egress Queue Information > Edit
LABEL
Queue Type
Shaping Rate
(kbps)
Apply
Cancel
FSG2200HNU User's Guide
Egress Queue on page 74
DESCRIPTION
Select whether it is Strictly Priority (SP) or Weighted Fair Queueing
(WFQ). Refer to
Egress Queue on page 74
these queue types.
If the queue type is SP, select whether the WAN interface has
Highest (for Queue Index 1 only), High (for Queue Index 1 and 2
only), Medium or Low priority.
If the queue type is WFQ, select the weight (1-10, where 10 gets the
highest bandwidth) assigned to the WAN interface.
This shows the maximum transmission rate allowed for traffic on this
queue.
Click this to save your changes back to the ZyXEL Device.
Click this to begin configuring this screen afresh.
for more information on these queue types.
for more information on
Chapter 5 WAN Setup
87
Advertisement
Table of Contents
