Table of Contents
Advertisement
Chapter 4 Status Screens
Each field is described in the following table.
Table 5 Status
LABEL
Refresh Interval Enter how often you want the ZyXEL Device to update this screen.
Refresh Now
Device Information
Host Name
Model Name
MAC
Address
Firmware
Version
WAN1 Information
Mode
IP Address
IP Subnet
Mask
LAN Information
IP Address
IP Subnet
Mask
DHCP Server This field displays what DHCP services the ZyXEL Device is providing to
WLAN Information
If you enable multiple SSIDs, the status of each activated SSID is shown below.
SSID (1~4)
Channel
Security
Mode
System Status
64
DESCRIPTION
Click this to update this screen immediately.
This field displays the ZyXEL Device system name. It is used for
identification. You can change this by clicking the link or going to the
Maintenance > System > General screen's Host Name field.
This is the model name of your device.
This is the MAC (Media Access Control) or Ethernet address unique to
your ZyXEL Device.
This field displays the current version of the firmware inside the device.
It also shows the date the firmware version was created. Click this to go
to the screen where you can change it.
This field shows the WAN interface type for the connection. It can be
either PPPoE or IPoE.
This field displays the current IP address of the ZyXEL Device in the
WAN. Click this to go to the screen where you can change it.
This field displays the current subnet mask in the WAN.
This field displays the current IP address of the ZyXEL Device in the
LAN. Click this to go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
the LAN. Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
None - The ZyXEL Device is not providing any DHCP services to the
LAN.
Click this to go to the screen where you can change it.
This is the descriptive name used to identify the ZyXEL Device in the
wireless LAN. Click this to go to the screen where you can change it.
Note: The ZyXEL Device supports up to four (4) SSIDs at the same
time.
This is the channel number used by the ZyXEL Device now.
This displays the type of security mode the ZyXEL Device is using in the
wireless LAN. Click this to change the security mode.
FSG2200HNU User's Guide
Advertisement
Table of Contents
