Setting Thick Paper Or Ohp Transparencies - Ricoh 402011 - Network Scanning Unit Type A Scanner Server Operating Instructions Manual

Using the Printer Function
G
Enter the vertical size of the paper
using the number keys, and then
press the {OK} key.
H
Press the {User Tools/Counter} key.
3
Setting thick paper or OHP
transparencies
Note
❒ Paper settings can also be set using
the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.
❒ Paper size settings set using the
printer driver have priority over
those set using the machine's con-
trol panel.
❒ When the printer driver is not used,
make settings using the control
panel.
Reference
For printer driver settings, see the
printer driver Help.
A
Press the {User Tools/Counter} key.
B
Select [System Settings] using the
{U} or {T} key, and then press
the {OK} key.
20
C
Select [Tray Paper Settings] using
the {U} or {T} key, and then
press the {OK} key.
D
Select [Paper Type:Bypass Tray] us-
ing the {U} or {T} key, and then
press the {OK} key.
E
Select [OHP (Transparency)] or [Thick
Paper] using the {U} or {T} key,
and then press the {OK} key.
F
Press the {User Tools/Counter} key.
Note
❒ Settings made remain valid un-
til they are reset again. After
printing on OHP transparencies
or thick paper, make sure you
clear settings for the next user.