Da-Lite ViewShare Advantage Electrol Retrofit Instruction Book page 6

Transfer of Existing Motor (continued)
4. Completely remove both shipping brackets from the board.
5. Remove the three Phillips head screws from motor end bracket
and remove wooden block (Figure 11).
6. On the ViewShare screen and roller assembly, loosen (but do not
remove) the nut on the motor end arm bracket (Figure 12).
7. Remove the two end bracket bolts securing the motor end bracket
to the shipping board. Slide the bracket away from the end while
supporting the roller (Figure 12).
6
Phillips
Head
Screws
Figure 11
Motor
End Arm
Bracket
Nut
End Bracket Bolts
Figure 12