Set The Phone Through Webbrowser; Login; Current State - Telematrix 9600IP User Manual

handset register mode, then the ON/OFF indicator light starts to flash, if then the
base unit and handset have found each other, the Charge indicator light will stop
flashing as well as the ON/OFF indicator light on the handset, and will give the
prompt tone for successful registration.
2.2.5 Delete handset:
Keep pressing the "FLSAH" key on the base unit for three seconds, the
Speaker will give "beep" sound, then
Press "0" on the base unit to delete all the handsets.
Press "1" on the base unit to delete the first handset.
Press "2" on the base unit to delete the second handset.
Press "3" on the base unit to delete the third handset.
Press "4" on the base unit to delete the fourth handset.
Press "5" on the base unit to delete the fifth handset.
After pressed the number keys, Charge indicator light will flashes, which
means the handset is being deleted by the phone. When Charge indicator light
stops flashing, it means that the deletion is finished.
3 Through web browser to set phone
Insert one end of net wire to interface of network card of computer, then insert the
other end to LAN interface of the phone, and set IP of computer 192.168.10.xxx or
automatically get IP. Then open the IE, input 192.168.10.1 on the address field. At this
time you will enter web setting page of phone IP100.
3.1 Login：
The default user name and password are admin/admin and guest/guest.

3.2 Current state

This page layout shows the work state of VoIP phone. The network part shows the
connection state of WAN interface and LAN interface and the network setting; the work
state of Public SIP service of VoIP part, and here you can see the registration and whether
registered to the server or not. The Phone Number part shows the telephone numbers in
Private SIP server and Public SIP server.
8