Lan Config; Voip; Sip Config - Telematrix 9600IP User Manual

3.3.2

LAN Config

LAN IP Netmask:
DHCP Server: Enable DHCP service in LAN port; after user changed LAN IP, phone
will automatically modify DHCP Lease Table and save the configure according to IP and
netmask, DHCP server configure won't take effect unless you reboot the device.
NAT: Enable NAT.
Bridge Mode: Enable this option to switch to bridge mode. IP phone won't assign IP
for its LAN port in bridge mode and its LAN and WAN port will be in the same network.
(This setting won't take effect unless you save the config and reboot the device)

3.4 VoIP

3.4.1 SIP Config

Setting page of public SIP server:
Set the IP and Netmask for the LAN
11