Introduction; Overview Of Hardware; Overview Of Software - Telematrix 9600IP User Manual

1.

Introduction

This is the user manual of 9600IP. Some configuration should be done before
use the 9600IP phone, then it can work normally. This manual will illustrate how to
set the phone through keyboard and web service.

1.1 Overview of Hardware

1.1.1
The two RJ-45 network interface support the 10/100M Ethernet. The default WAN
interface is a DHCP Client server. User connect the WAN interface to ADSL or
switch,
Lan is web-bridge mode, and bridged the LAN and WAN into the same network.
You can use the administrator's user name "admin" and password"admin"to login
and set.
1.1.2
Only the WAN interface support the POE.

1.2 Overview of Software

Network Protocol
SIP v1(RFC2543)
V2(RFC3261)
IP/TCP/UDP/RTP/RTCP
IP/ICMP/ARP/RARP/SNTP
TFTP Client/DHCP Client/PPPOE
Client
Telnet/HTTP Server
DNS Clients
Codec
G.711： 64K bit/s(PCM)
G.723.1： 63k/5.3k bit/s
G.726： 16k/24k/32k/40k
bit/s(ADPCM)
G.729A： 8k bit/s(CS-ACELP)
G.729B： adds VAD & CNG to
G.729
Voice Quality
VAD： Voice activity detection
CNG： Comfortable noise
generator
LEC： Line echo canceller
Packet Loss Compensation
Adaptive Jitter Buffer
Call Function
Call Hold
Call Waiting
Tone
Ring Tone
Ring Back Tone
Dial Tone
Busy Tone
Phone Function
Volume Adjustment
Speed dial key
Phonebook
IP Assignment
IP (Static IP)
DHCP
PPPoE
Security
HTTP 1.1 basic/digest
authentication for Web setup
MD5 for SIP authentication
(RFC2069/RFC2617)
QoS
QoS field
NAT Traversal
STUN
Configuration
.
5