Cisco TelePresence System Codec C90 Reference Manual page 200

Cisco TelePresence System Codec C90
Contents Introduction
xStatus SystemUnit Hardware Module Identifier
Shows the revision of the hardware module in the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware Module Identifier
*s SystemUnit Hardware Module Identifier: "1"
** end
xStatus SystemUnit Hardware Module CompatibilityLevel
The Cisco TelePresence endpoints are using a NAND flash memory for general storage. The
endpoints running TC software are manufactured with a new version of the flash memory. Endpoints
having the new version of the flash memory must run software TC4.2.1 or later. Some previous TC
software versions are updated to support the new flash memory. Please check the release note
to find if the new version of the flash memory is supported. If your endpoint does not have the
CompatibilityLevel command it does not have the new flash memory installed.
The result returned when running the command is either 0 or 1:
0 = The system does not have the new flash memory installed.
1 = The system has the new flash memory installed. If downgraded, it can only be downgraded to
previous TC software versions having support for the new version of the flash memory.
Value space of the result returned:
<"1"/"0">
Example:
xStatus SystemUnit Hardware Module CompatibilityLevel
*s SystemUnit Hardware Module CompatibilityLevel: 1
** end
xStatus SystemUnit Hardware MainBoard SerialNumber
Shows the serial number of the main board in the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware MainBoard SerialNumber
*s SystemUnit Hardware MainBoard SerialNumber: "PH0999989"
** end
Codec C90 API Reference Guide TC7.0, JANUARY 2014.
D14641.15
About the API xConfiguration
xStatus SystemUnit Hardware MainBoard Identifier
xStatus SystemUnit Hardware VideoBoard SerialNumber
xStatus SystemUnit Hardware VideoBoard Identifier
xStatus SystemUnit Hardware AudioBoard SerialNumber
200
xCommand
Shows the revision of the main board in the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware MainBoard Identifier
*s SystemUnit Hardware MainBoard Identifier: "101400-5 [06]"
** end
Shows the serial number of the video board in the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware VideoBoard SerialNumber
*s SystemUnit Hardware VideoBoard SerialNumber: "PH0999999"
** end
Shows the revision of the video board in the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware VideoBoard Identifier
*s SystemUnit Hardware VideoBoard Identifier: "101410-4 [07]"
** end
Shows the serial number of the audio board in the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware AudioBoard SerialNumber
*s SystemUnit Hardware AudioBoard SerialNumber: "PH0999997"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.