Cisco TelePresence System Codec C90 Reference Manual page 192

Cisco TelePresence System Codec C90
Contents Introduction
xStatus Security Persistency InternalLogging
Shows whether internal logging is set to persistent or non-persistent mode. Persistent is the default
mode.
Value space of the result returned:
<NonPersistent/Persistent>
Example:
xStatus Security Persistency InternalLogging
*s Security Persistency InternalLogging: Persistent
** end
xStatus Security Persistency LocalPhonebook
Shows whether local phone book is set to persistent or non-persistent mode. Persistent is the
default mode.
Value space of the result returned:
<NonPersistent/Persistent>
Example:
xStatus Security Persistency LocalPhonebook
*s Security Persistency LocalPhonebook: Persistent
** end
xStatus Security Persistency DHCP
Shows whether DHCP logging is set to persistent or non-persistent mode. Persistent is the default
mode.
Value space of the result returned:
<NonPersistent/Persistent>
Example:
xStatus Security Persistency DHCP
*s Security Persistency DHCP: Persistent
** end
Codec C90 API Reference Guide TC7.0, JANUARY 2014.
D14641.15
About the API xConfiguration
xStatus Security Audit Server Port
192
xCommand
Returns information on which syslog server port the audit logs are configured to be sent to.
Value space of the result returned:
<Integer>
Example:
xStatus Security Audit Server Port
*s Security Audit Server Port: 514
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.