Cisco TelePresence System Codec C90 Reference Manual page 197

Cisco TelePresence System Codec C90
Contents Introduction
xStatus SIP Profile 1 DirectoryURI Primary URI
Returns the primary directory URI set for the endpoint in UCM. Directory URI is associated with a
directory number, and can be used to make calls and identify callers. Up to five directory URIs can
be set, but only one of them can be set as primary.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile DirectoryURI Primary URI
*s SIP Profile 1 DirectoryURI Primary URI: "123456@company.com"
** end
Codec C90 API Reference Guide TC7.0, JANUARY 2014.
D14641.15
About the API xConfiguration
Standby status
xStatus Standby Active
197
xCommand
Shows if the system is in standby or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Standby Active
*s Standby Active: Off
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.