Cisco 880 Series Hardware Installation Manual page 33

Chapter 1 Product Overview
Figure 1-14
Figure 1-14 Back Panel of the Cisco C888SRST-W Voice Router
1
2
3
4
5
1. Depending on the router model, the primary WAN port can be either G.SHDL or 10/100 FE.
2. Ports 0 and 1 provide PoE with the optional PoE module installed.
3. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected
Caution
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-12
shows the back panel details of the Cisco 888SRST-W voice router.
2
1
Primary WAN port —G.SHDSL
Voice ports—four FXS/DIDports and one
voice BRI port
4-port 10/100 Ethernet switch
Serial port—console or auxiliary
PoE power connector for optional PoE
3
module
to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install the Field
Replaceable Unit (FRU) to enable the PoE function. For this you either need the FRU "800-IL-PM=2" or "800G2-POE-2".
If your device has a separate PoE inlet, use the 800-IL-PM=2, if it has one combined inlet (a description saying "POE
OPTION REQUIRES 5A POWER ADAPTOR"), then use the 800G2-POE-2.
The primary WAN port on all 888E models is designed for an RJ-45 connector only. Damage
to the primary WAN port may occur if a non-RJ-45 connector is inserted.
1 2 6
6
7
2
8
9
10 Kensington security slot
3 4 5 7
Antenna—captive wireless omnidirectional
dipole WLAN antenna (wireless models only)
Reset button
Power connector
Earth ground connection
Cisco 880 Series ISRs
8 9 10
1-17