Custom Configuration File For Cisco 892Fsp, 896Va, 897Va, And Cisco 898Ea - Cisco 880 Series Hardware Installation Manual

Chapter 1 Product Overview
Verify that IOS is running correctly by checking that the system status LED is on.
Step 1
Press and hold the Reset button until the system status LED begins to flash. Typically, this occurs within
Step 2
5 seconds.
The router reloads itself after the startup configuration has been replaced with the new customer
configuration.

Custom Configuration File for Cisco 892FSP, 896VA, 897VA, and Cisco 898EA

For the first method, the configuration file can be located on the router's compact flash or on the router's
nvram. The custom configuration file must use cfg as the filename extension.
When the system attempts to load a custom configuration file, configuration files on nvram have priority
over configuration files on the router's compact flash.
The priority for loading a configuration file is as follows:
If the router does not find a valid custom configuration file, the system aborts the process.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-12
1. nvram: *.cfg
2. Router flash: *.cfg
Hardware Features
1-45