Connecting A Pc, Server, Or Workstation - Cisco 880 Series Hardware Installation Manual

Chapter 3 Connecting the Router

Connecting a PC, Server, or Workstation

To connect a PC (or other Ethernet devices) to an Ethernet switch port, follow these steps:
Step 1 Connect one end of the yellow Ethernet cable to an Ethernet switch port on the router.
a Cisco 888W router connected to a PC.
Figure 3-1
1
2
Connect the other end of the cable to the RJ-45 port on the network interface card (NIC) that is installed
Step 2
in the PC, server, or workstation.
(Optional) Connect additional servers, PCs, or workstations to the other Ethernet switch ports.
Step 3
Use the Cisco Configuration Express to configure the Internet connection settings. See
Note
Cisco Configuration Professional Quick Start Guide
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-12
Connecting a Server, PC, or Workstation
1
Yellow Ethernet cable supplied with the router 3
Ethernet switch port on the router
2
3
RJ-45 port on the network interface card
for more information.

Connecting a PC, Server, or Workstation

Figure 3-1 shows
3-5