Wireless Network - Brother ADS-1100W Quick Setup Manual

Wireless Network

g
Choose your machine from the list, and then
click Next.
NOTE
• If your machine is not found over the network,
confirm your settings by following the
on-screen instructions.
• If you are using WEP and the WiFi light
the Control Panel lights up (for ADS-1100W),
or the LCD displays Connected (for
ADS-1600W) but your machine is not found on
the network, make sure you entered the WEP
key correctly. The WEP key is case-sensitive.
h
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
NOTE
• DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
• If the Windows Security screen appears,
select the check box and click Install to
complete the installation correctly.
i
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
6
Finish and restart
a
Click Finish to restart your computer.
NOTE
If an error message appears during the software
installation, do one of the following:
®
- Windows
®
Windows
Diagnostics located in
All Programs > Brother > ADS-XXXXX
(where XXXXX is your model name).
®
- Windows
Diagnostics, double-click
Utilities) on the desktop, and then click the
drop-down list and select your model name (if
not already selected). Click Tools in the left
navigation bar.
on
b
The following screens will appear:
• When the Software Update Setting screen
appears, choose the software update setting
you want and click OK.
• When the Brother Product Research and
Support Program starts up, follow the
on-screen instructions.
NOTE
• Internet access is required for the software
update and the Brother Product Research and
Support Program.
• When you install MFL-Pro Suite, Brother Help
will also be installed automatically. Launch
Brother Help
in the system tray. Click
access the Brother Solutions Center.
Finish
To install optional applications:
Now go to
Page 16
Windows
®
XP, Windows Vista and
7 users: Run the Installation
(Start) >
8 users: To run the Installation
(Brother
by clicking
The installation is now
complete and it is time to
do a test scan. See Test
Scan (scan to PDF) on
page 17.
®
to
9