Presser Feet - Pfaff passport 2.0 Owner's Manual

Presser feet

Important: Make sure that the IDT™ system is disengaged when using presser foot 2A, 5B.
6
Standard presser foot 0A with IDT™ system (shown as
display, attached on the machine upon delivery)
This foot is used mainly for straight stitching and zigzag stitching with a
stitch length longer than 1.0 mm.
Fancy stitch foot 1A with IDT™ system (shown as
Fancy stitch foot 2A (shown as
Blindhem foot 3 with IDT™ system (shown as
This foot is used for blindhem stitches. The toe on the foot guides the
fabric. The red guide on the foot is designed to ride along the fold of the
hem edge.
Zipper foot 4 with IDT™ system
This foot can be snapped on either the right or the left of the needle,
needle position to the right or left to sew closer to zipper teeth.
One step Buttonhole foot 5B (shown as
This foot has a space in the back to set the size of the buttonhole. The
in the display)
in the display)
in the display)
in the display)
in the