Optional Presser Feet - Pfaff select 150 Owner's Manual

Optional presser feet

The limited edition accessory foot package is packed in the box with your PFAFF®
select™ sewing machine. The package contains the following optional presser feet:
Couching/Braiding foot
You can create beautiful trims when you
use the Couching/Braiding Foot and your
machine's decorative stitches to sew over
yarn, cords, narrow satin ribbon, soutache
braid, etc.
1. To attach cords, use matching, invisible
or decorative embroidery thread.
2. Insert the cording or tape from the front
of the foot into the eyelet-type guide and
pull it through the front hole, underneath
and to the back of the presser foot.
3. Engage the IDT™ system.
4. Select stitch, i.e. zigzag, blind hem or
decorative. Sew the design by following
the pre-marked design lines. Or, sew
random lines and waves for a decorative
textured effect.
TIP: Try several smaller cords and yarns, twist
them together to create texture and combine
colors.
7/9 hole cord foot
Wonderful decorative embellishments are
easy with this special foot. You can sew up
to nine different lengths of embroidery oss,
pearl cotton or high sheen threads in place
with your choice of a decorative or utility
stitch.
1. Cut your cords to the desired length.
Thread the cords through the holes in the
foot from the top to the bottom. Lead the
cords under the presser foot and out the
back. Leave the thread tails extending
about 1 1/2 inches to 2 inches (4 - 5 cm) at
the back.
Utility stitches and practical sewing 35