Presser Feet - Pfaff creative 1.5 Owner's Manual

Included Hoop
1. creative™ MASTER HOOP (240x150 mm)
Included Accessories not in Picture
• Foot control
• Power cord
• Needles
• Hard cover

Presser Feet

OA -Standard Presser Foot for IDT™ System
(attached on the machine upon delivery)
This foot is used mainly for straight stitching and zigzag stitching with a stitch length longer
than 1.0 mm.
1A - Fancy Stitch Foot for IDT™ System
This foot is used for decorative stitches. The groove on the underside of the foot is designed
to flow smoothly over the stitches.
2A - Fancy Stitch Foot
When sewing decorative stitches or short zigzag stitches and other utility stitches with less
than 1.0mm stitch length, use this foot. The groove on the underside of the foot is designed
to flow smoothly over the stitches.
3 – Blindhem Foot for IDT™ System
This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide
on the foot is designed to ride along the fold of the hem edge.
4 – Zipper Foot for IDT™ System
This foot can be snapped on either the right or the left of the needle, making it easy to sew
close to both sides of the zipper teeth. Move the needle position to the right or left to sew
closer to zipper teeth.
5 – One Step Buttonhole Foot
This foot has a space in the back for a button used to set the size of the buttonhole. The
machine will sew a buttonhole to fit that button size. Used to sew buttonholes up to 25mm.
9