Needle Threader; Threading For Twin Needle - Pfaff passport 2.0 Owner's Manual

Needle threader

The needle threader allows you to thread the
needle automatically. The needle must be in its
highest position to use the built-in needle threader.
Press the needle up/down button to make sure the
needle is fully raised.
We also recommend lowering the presser foot.
1. Use the handle to pull the needle threader all
through the needle eye.
3. Let the needle threader gently swing back. The
hook pulls the thread through the needle eye
and forms a loop behind the needle. Pull the
thread loop out behind the needle.

Threading for twin needle

Replace the sewing needle with a twin needle.
Make sure that the presser foot is raised and the
needle is in its highest position.
appropriately sized spool cap. Insert the
and a felt pad. Place the second thread on the
spool pin.
from back to front. Pull both threads between
3. Thread down through the right-hand
threading slot and then upwards through the
left-hand threading slot.
threading slot. Place the threads into the lower
and the other thread into the slot on the right
sure that the threads do not become twisted
together.
5. Thread the needles.
G
F
depends on the stitch position, the stitch width and/or the size
A
B
D C
F
E
G
13