Pfaff CREATIVE 4.0 - UPDATE INSTRUCTIONS VERSION PC40-1503-5177 Instructions

PFAFF
update instructions
Version: pc40_1503_5177
The update is available to all registered Pfaff
4.0 sewing and embroidery machine
creative
TM
owners. You need the Pfaff
Machine Communication CD which came
with your Pfaff ®
creative
embroidery machine, or 4D
Software, version 8.1 and above. The software
must be installed on a personal computer,
running Windows XP or Windows
®
Your machine must be registered using 4D
Configure on the computer with the machine
connected. Internet updates for the machine can
only be received via the Smart Update feature in
4D Configure.
TM
If you need assistance registering your machine,
full instructions are found in the Internet FAQs.
Open 4D Organizer. From the Help menu,
TM
select Internet FAQs. Enter "HA005" in the
Search box and choose "all FAQ" for the Search.
How to download
1. Connect your creative
embroidery machine to the computer with the
USB Cable. Turn your machine on. Make sure
the embroidery machine communication icon
at the bottom right of your computer screen
is active (active
If you don't find the Embroidery
Machine tray icon
Open 4D Configure. Click on the
TM
Send 1 tab and click on the "Embroidery
Machine Communication" button.
creative
®
® Embroidery
4.0 sewing and
TM
Embroidery
TM
Vista.
®
TM
4.0 sewing and
TM
, not active ).
4.0
™
® If you have an inactive
Embroidery Machine tray icon
Make sure your machine is turned on and
connected to your computer.
Please Note: You must use the same USB port
on your computer as when you activated
the Embroidery Machine Communication at
installation.
2. Connect your computer to the Internet.
3. Open the program 4D
(Go to Start/All Programs/4D Embroidery
System/4D Configure).
4. Click on "Smart Update". You may be asked
if your system has a dongle. Answer No.
5. The program starts searching for the latest
update version for your machine and a list
with suggested downloads is presented.
6. Click on "Download" and save the download
to your computer. Note the location saved in.
Update
1. Double click the creative
pc40_1503_5177.exe
2. Follow the quick start guide instructions:
a. Connect the sewing machine to the computer
with the USB cable. Make sure the machine is
switched off.
Configure
TM
4.0 update
TM