Spread Spectrum - Foxconn A7VA Series User Manual

to change the clock rate of graphics engine. You can use the <+> or <-> keys to change the
value, or you can type the desired value by using the numeric keypad.

► Spread Spectrum

If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference)
generated by the system, so to comply with FCC regulation. But if overclocking is activated,
you had better disable it.
Voltage Options
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
CPU Voltage Control
DRAM Voltage Control
NB Voltage Control
HT/SB Voltage Control HT/SB Voltage Control
↑↓←→:Move
► CPU Voltage Control
This option is used to change the CPU voltage in a step of 25mV. The voltage can be
incremented from +25mV to +775mV.
► DRAM Voltage Control
This option is used to change the DRAM voltage in a step of 50mV. The voltage can be
incremented from +50mV to +600mV.
► NB Voltage Control
This option is used to change the North Bridge voltage in a step of 30mV. The voltage can be
incremented from +30mV to +360mV.
► HT/SB Voltage Control HT/SB Voltage Control
This option is used to change the HT/SB voltage in a step of 30mV. The voltage can be
incremented from +60mV to +360mV.
Voltage Options
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled] [Disabled]
Enter:Select
F1:General Help
Disabled Disabled Disabled
+25mV
+50mV +50mV
+75mV +75mV
+100mV
+125mV +125mV
+150mV +150mV
+175mV +175mV
+200mV +200mV
+225mV +225mV
+250mV +250mV
+275mV +275mV
+300mV +300mV
+325mV +325mV
+350mV +350mV
+/-/:Value F10:Save
F9:Optimized Defaults
28
Help Item
Options
ESC:Exit