Usb Configuration; Legacy Usb Support - Foxconn A7VA Series User Manual

SATA IDE Combined
Mode Enabled
SATA as
Second-
ary
Primary IDE Master IDE0
Primary IDE Slave IDE1
Secondary IDE Master SATA 5
Secondary IDE Slave SATA 6
Third IDE Master SATA 1
Third IDE Slave SATA 2
Fourth IDE Master SATA 3
Fourth IDE Slave SATA 4

USB Configuration

USB Configuration USB Configuration
Module Version - 2.24.2-13.4
USB Devices Enabled : USB Devices Enabled :
1 Drive

Legacy USB Support

USB 2.0 Controller Mode
BIOS EHCI Hand-Off BIOS EHCI Hand-Off
► USB Storage Configuration
↑↓←→:Move
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB 2.0 Controller Mode
This item is used to set the transmission rate mode of USB 2.0. The available settings are :
[High Speed] in 480Mbps; [Full Speed] in 12Mbps.
► BIOS EHCI Hand-Off
Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI)
specification, but there are a few features that are not implemented. Microsoft said preliminary
With PATA IDE drives
OnChip SATA Channel Enabled
SATA IDE Combined
Mode Disabled
SATA as SATA as
Primary Secondary
SATA 5 IDE0
SATA 6 IDE1
IDE0 -
IDE1 -
SATA 1 SATA 1
SATA 2 SATA 2
SATA 3 SATA 3
SATA 4 SATA 4
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Enter:Select
F1:General Help
OnChip
SATA OnChip SATA Channel Enabled
Channel
Disabled
SATA IDE Combined
Mode Enabled
SATA as SATA as
Primary Second-
ary
- SATA 5 -
- SATA 6 -
IDE0 IDE0 SATA 5
IDE1 IDE1 SATA 6
SATA 1 - SATA 1
SATA 2 - SATA 2
SATA 3 - SATA 3
SATA 4 - SATA 4
USB Configuration
Enables support for
legacy USB.
Auto option disables
legacy support if
no USB devices are
[Enabled] [Enabled] connected.
[Enabled]
[High Speed] [High Speed]
[Enabled] [Enabled] [Enabled]
[Press Enter]
+/-/:Value F10:Save
F9:Optimized Defaults
36
Without PATA IDE drives
OnChip
SATA
Channel
Disabled
SATA IDE
Combined
Mode
Disabled
SATA as
Primary
SATA 5 - SATA 5
SATA 6 - SATA 6
- -
- -
SATA 1 SATA 1
SATA 2 SATA 2
SATA 3 SATA 3
SATA 4 SATA 4
Help Item
ESC:Exit
RAID/
AHCI
IDE0
IDE1
- -
- -
- -
- -
- -
- -