Table of Contents
Advertisement
NetDVR.book Page 43 Wednesday, May 12, 2004 4:06 PM
NetDVR | User's Guide | Playback
5.5.2 Play Control Panel
Previous/Reverse-Play/Stop/Play/Next (from left to right).
Note:
Clicking the 'prev' ('next') button once advances to the previous (next) frame.
5.5.3 Playback Time Select
•
"Playback time select" defines the detail of the playback
time scale; the range selections are 5, 10, 15, 30 and 60
minutes.
Three lines of information are provided:
Line 1 – Playback begin time and date.
Line 2 – Playback end time and date.
Line 3 – Number of frames (images) selected in the playback time scale.
5.6 Playback image monitoring
5.6.1 (1) Total recorded time indication
•
This indicates the date, time, from the starting point to the finishing point of recorded
data.
•
The scale division is in Hour (H) and Day (D) of the month.
5.6.2 (2) Scroll bar for selection of time and date
•
The scroll bar may be moved within range of recorded data.
•
To select a section of the recording, drag the scroll bar with the mouse. While dragging
the scroll bar the time and date is shown in a pop up box.
•
Click the arrow button on either side of the scroll bar to step through the time scale with
increments equal to the selected playback time range of 5, 10, 15, 30 and 60 minutes.
•
The width of scroll bar depends on the ratio of total recorded time and playback range
selection.
5.6.3 (3) Selected range indication
•
The time scale indicates the time duration of the selected data.
•
Displayed time range is 5, 10, 15, 30 or 60 minutes (as set by the 'Range time select'
buttons).
Bosch Security Systems | 2004-01
43
Advertisement
Table of Contents
